Loading platform AUSBAU-PLT

If a warehouse is not equipped with standard loading docks, then use the AUSBAU-PLT truck loading platform.If a warehouse is not equipped with standard loading docks, then use the AUSBAU-PLT truck loading platform.

Loading platform AUSBAU-PLT

The AUSBAU-PLT loading platform is installed to the warehouse wall from the outside. It expands the service area and facilitates manoeuvring of the truck when approaching the opening.

The truck loading platform can be a single platform or can include separate interconnected modules that provide access to vehicles, ladders, steps and loading bridges. The AUSBAU-PLT loading platform is a prefabricated construction, therefore you can move it within the warehouse or outside, if needed.

Loading platform AUSBAU-PLT_2

Additional options are provided for both truck loading platforms and ramps. Therefore, depending on the type of the loading work, you can install a hydraulic dock leveller, a vertical dock leveller, adjustable support legs, and an additional hinged dock board. For greater safety of employees, the platform can be equipped with railings, protective chocks or bumper supports.

Technical features of the modular loading platform AUSBAU-PLT:

Load of the platform, kg3000 / 8000 / 12000
Total length, mm4300 / 6300
The total width, mm2400 / 2800
Loading stage length, mm300
Working height, mm1200
Carriageway surfacegrating / lentil sheeting
Warranty18 months

Aanvullende uitrusting voor het laadplatform AUSBAU-PLT:


OPT-RRB – wheels guides for a truck 1780х500х308 mm, pair.
OPT-RRB – wheels guides for a truck 1780х500х308 mm, pair.

OPT-DL – built-in leveling platform, instead of a bridge FxD.
OPT-DL – built-in leveling platform, instead of a bridge FxD.

OPT-HA2 – height adjustment on two sides G. Height adjustment H by means of support legs mounted on both sides G.
OPT-HA2 – height adjustment on two sides G. Height adjustment H by means of support legs mounted on both sides G.

OPT-AB – additional bridge. Additional connecting hinged bridge 300×2000 mm on the free side of G or L.
OPT-AB – additional bridge. Additional connecting hinged bridge 300×2000 mm on the free side of G or L.

OPT-RRB – rubber rectangular bumpers 400x250x100 mm, pair.
OPT-RRB – rubber rectangular bumpers 400x250x100 mm, pair.

OPT-ZRS – galvanized grille instead of the usual.
OPT-ZRS – galvanized grille instead of the usual.

OPT-HRL – railing on the 1st side of the L. Railing on ramp safe passage for pedestrians thanks to a 1000 mm high railing. They are installed instead of basic fencing (height 250 mm).
OPT-HRL – railing on the 1st side of the L. Railing on ramp safe passage for pedestrians thanks to a 1000 mm high railing. They are installed instead of basic fencing (height 250 mm).

OPT-LD – ladder to the platform – allows the driver to step first onto the platform, and then go down the stairs (different vehicles have different lengths, ie different location of the driver’s door from the warehouse wall).
OPT-LD – ladder to the platform – allows the driver to step first onto the platform, and then go down the stairs (different vehicles have different lengths, ie different location of the driver’s door from the warehouse wall).

OPT-HA1 – height adjustment on 1st side G. Height adjustment H thanks to supporting legs mounted on the one side G (under the bridge FxD).
OPT-HA1 – height adjustment on 1st side G. Height adjustment H thanks to supporting legs mounted on the one side G (under the bridge FxD).
10. Traffic light with motion sensor – turns green when the truck driver can drive into the driveway and switches to red when he has to stop.

10. Traffic light with motion sensor – turns green when the truck driver can drive into the driveway and switches to red when he has to stop.


OPT-HRL – railing on the 1st side of the L. Railing on ramp safe passage for pedestrians thanks to a 1000 mm high railing. They are installed instead of basic fencing (height 250 mm).
OPT-HRL – railing on the 1st side of the L. Railing on ramp safe passage for pedestrians thanks to a 1000 mm high railing. They are installed instead of basic fencing (height 250 mm).

OPT-DRBL – rubber bump stops on the side L. Type D, dimensions: 90×80 mm.
OPT-DRBL – rubber bump stops on the side L. Type D, dimensions: 90×80 mm.
  OPT-DRBG – rubber bump stops on the side G. Type D, dimensions: 90×80 mm.
OPT-DRBG – rubber bump stops on the side G. Type D, dimensions: 90×80 mm.

Dimensions of standard models of the loading platform AUSBAU-PLT:

Verladeplattform AUSBAU-PLT

#ModelLoad capacity, kgLoading platform sizes, mm
GLDDLHFF1
1PLT3-2400×4000300024004000300430012002000300
2PLT3-2400×6000300024006000300630012002000300
3PLT3-2800×4000300028004000300430012002000700
4PLT3-2800×6000300028006000300630012002000700
5PLT8-2400×4000800024004000300430012002000300
6PLT8-2400×6000800024006000300630012002000300
7PLT8-2800×4000800028004000300430012002000700
8PLT8-2800×6000800028006000300630012002000700
9PLT12-2400×40001200024004000300430012002000300
10PLT12-2400×60001200024006000300630012002000300
11PLT12-2800×40001200028004000300430012002000700
12PLT12-2800×60001200028006000300630012002000700

If you are not sure which solution suits you best, our experts will advise you. We offer various solutions for your warehouse that will help you in your business.

Callback
Please fill in the form below and we will contact you as soon as possible.
Subscribe to the newsletter
Ask a question
Fill in these fields or send your request to: mail@ausbaurampa.com